Front seal and bearing kit

Newer style Whirlpool - Inglis - ( some ) Kenmore dryer front drum support ring install help. Parts link for this part. 

~ Remove power

~ Raise top and consol assembly ( tips for disassembly ) 

~ Remove toe panel if used

~ Remove front cabinet panel

~ Remove the old bearing and seal from the front panel. Leave the 3 plastic plugs

~ Install the new bearing and seal around the opening flange, with the white portion of the seal to the outside of the front panel flange....see picture here

~ Make sure the folded edge of the seal is facing away from the front cabinet panel, and the 3 holes in the bearing fit over the 3 plastic clips. Fold seal with white portion of the seal sandwiched between the fold of the seal...see picture here

~ Replace front panel and top

~ Reconnect power and test

Common heating element

Dryer door latch kit, fits many brands of dryer