Changing a common water tank on a Frigidaire SxS refrigerator....

Remove the crispers and meat keeper and meat drawer cover.

Remove the old water tank by pulling straight out at the top and bottom, cut the water tube lines off within 2 inches of the tank.

Place the new tank in the right corner by pushing the top of the tank behind the crisper cover and up until you feel it hit the underneath of the cover, then pull it down 1/4 - 1/2 inch.

Using the 2 screws provided, mount the tank to the liner. No need to predrill the holes, the screws will cut there own hole. DO NOT over tighten the screws.

Line up the end of the water lines coming from the tank with water lines going out the bottom of the food compartment liner, cut off excess tubing.

Using the 2 tube adaptors provided in the kit, connect the new tank lines to the refrigerator water lines.

Run water through tank until the air is bled out, check for leaks.

Reinstall the cover and drawers.

Picture help 1

Picture help 2

Picture help 3

Picture help 4