Washer Lid Switch Assembly 131675800
Some information and help with changing the lid switch assembly on a Frigidaire built top load washer...
Upgraded 134101800 Washer Lid Lock Switch Replacement Part
Lid switch assembly
Lid switch assembly part# 134101800 replaces older switches 131675600, 3205646 & 131595100
Some installation tips.....
Free standing washer:
- disconnect the washer from the electrical supply
- raise and brace the top panel
- disconnect the wire harness from the lid lock assembly
- using a 1/8" drill bit, drill out the rivets securing the mounting bracket to the washer top panel and remove the original switch ( not all have rivets, some are just screws )
- remove and save the screws securing the lid lock switch to the mounting bracket
- install the new lid lock switch using the previously removed screws
Laundry center washer,
- disconnect the power from the electrical supply
- remove the washer front panel and washer top panel
- disconnect the wire harness from the lid lock switch
- using a drill and a 1/8" bit, drill out the rivets securing the mounting bracket to the washer top panel and remove the original switch and bracket ( not all have these rivets )
- remove and save the screws securing the lid lock switch to the mounting bracket
- install the new lid lock switch assembly using the previously removed screws. On some models, a 1/2" O.D. washer may be required to secure one of the screws to the top panel.
Note: Some original lid lock switch assembly's had an additional switch to operate the consol light. This type of assembly is no longer available. When replacing this type with a light switch, cut and tape off the ends of the two light switch leads. The light can still be operated using the consol switch.
Related Links
