Some tips and procedures on replacing a common Whirlpool evaporator fan motor....

 Disconnect power before servicing!!

- Unplug refrigerator 

- Remove the screws and the back wall of the freezer

- Remove fan motor

- Install the 2 mounting grommets and the 2 sleeves from the fan motor kit onto the new motor as shown in Figure 2. NOTE: On models with foam-insulated cabinets and special screw grommets  ( shown in Figure 1 ) - Do not use the 2 sleeves provided in the kit to mount the motor.

- Mount push-on fan blade onto the motor

- Connect wire leads to the new motor

- Mount the new motor to the liner with the 2 screws provided in the kit. NOTE: Porcelain liner models may require breaking off the ends of the mounting brackets where shown in Figure 2.

- Plastic liner models do not need the parts in this kit.

- Make sure that the fan blade spins freely

- Reinstall the cover panel

- Plug in the refrigerator